16
Reading Text files
1. Thumbnail of the available text files will be displayed on the screen. If no files are displayed then select the folder
containing the text files.
2. To read particular text file select the required file and press OK key.
3. Press ◄/►/▲/▼ keys to browse the text. Press MENU key to stop text read.
USB menu settings for text read
Press OK key to get following Menu setup shown above.
1. [Next Page]: Select the duration of time a page is to be displayed.
2. [Display Mode]: Select the text display mode as 4:3 and 16:9.
3. [Font Size]: Select the text font size.
Formats supported to multimedia mode: Photo, Music, and Video.
Picture
Format Resolution Type Note
JPEG 16128×16128 Baseline JPEG
Audio
Format Sample Rate Date Rate Channel
MP3 8-48KHz 8-320Kbps Mono/Stereo
Video
Format File Extension Codec Date Rate
Real media .RM/.RMVB RealVideo8/9 Max 1200Kbps
MPEG1/2 .DAT/.MPG MPEG-1/2 Video Max 3000Kbps
MPEG4 .AVI/.MP4 DIV×3/4/5/6XviD/H.264 Max 1500kbps
Remarks:
1. USB interface of digital multimedia player is not all-purpose. So when some USB devices could not be recognized,
the problem is usually not the performance failure but due to device driver.
2. Because USB devices and memory capability are different, the time needs for multimedia player to read
information are also different. So the information reading speed of the player temporarily getting slow are not the
performance failure.
3. The voltage supplied to USB interface is 5V, and the most electrical current is 500mA. When some interface
criteria of USB devices are different from standard USB protocol, digital multimedia player may be unable to
recognize USB devices correctly, which is normal status.
4. USB could be used as an interface to update software.
5. If some files source could not play because of the parameter decoding-limitation, the problem is not performance
failure.
6. The system only applies to memory medium with FAT32 and NTFS format.7. The system cannot support dynamic
Gif format.
To Next Page
Loading...
Need help?
General
