12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma 1
DCR Off
Overdrive Off
1). Press the
MENU-button
to activate the OSD window.
2). Press Left or Right to navigate through the functions. Once the desired function is highlighted, press the MENU-
button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired function is
highlighted, press
MENU-button
to activate it.
3). Press Left or Right to change the settings of the selected function. Press AUTO–button to exit. If you want to adjust
any other function, repeat steps 2-3.
4). OSD Lock/Unlock Function: To lock or unlock the OSD, press and hold the Down–button for 10s while OSD function
is not active.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). If the product screen size is 4:3 or input signal resolution is native resolution, the item of “Image Ratio” is disabled.
3). ECO modes (except Standard mode), Clear vision, DCR, DCB mode and Picture Boost, for these states that only one
state can exist.
To Next Page
Need help?
General
Weight and Dimensions
