AR5000 Quick Reference Guide
The label on a particular key generally points to ite’s function([MODE] to set receive mode). The labels
above the keys are additional functions which are accessed by first pressing the [FUNC] key and then the
key in question. Many of the second functions will access a menu with several selections. Normally the
[UP],[DOWN] buttons are then used to move between selections and sub-dial is used to adjust settings,
with the [PASS] key being also used occasionally for some selections.
A
AGC set [FUNC][STEP]
Alarm active [FUNC][8]
Alarm set [FUNC] press & hold [8]
Antenna select [FUNC][ATT]
Attenuator set [ATT]
Audio input [FUNC][MODE] : AF Set Menu
Audio De-emphasis [FUNC][MODE] : AF Set Menu
B, C
Baud rate, set [FUNC][kHz] : Config Menu
Beep [FUNC][kHz] : Config Menu
Clock, display [FUNC][7]
Clock set [FUNC] press & hold [7]
Cyberscan, activate [FUNC] press & hold [ENT]
CW pitch, set [FUNC] : AF Set Menu
D,E
Delete, Memory CH [FUNC][.] in Scan or M.RE mode
Delete, Memory bank [FUNC] press & hold [.] Del. Mode,
select MEM-CH using [UP],[DOWN]
keys, select bank # with sub-dial,
press [PASS] to delete
Delete, Search bank [FUNC] press & hold [.] Del. Mode,
select SRCH using [UP][DOWN]
keys, select bank # with sub-dial,
press [PASS] to delete
DTMF select [FUNC][0]
External IF output [FUNC][kHz]
H, I, K, L, M
High-pass filter [FUNC][Mode] : AF Set Menu
IF bandwidth select [FUNC][3]
Key lock, activate [FUNC][2] toggle on/off
Lamp [FUNC] [kHz] : Config Menu
Low-pass filter [FUNC][MODE] : AF Set Menu
Memory channel write
from VFO
press & hold [ENT]
O, P, R
Offset, initiate [FUNC][5]
Offset, Specify [FUNC] press & hold [5]
Priority channel, activate [PRIO] toggles on/off
Priority channel, set [FUNC][PRIO]
RF gain cont., activate [FUNC][6]
CW pitch, set [FUNC] : AF Set Menu
Scan
Bank link
Pause
Delay
Level squelch
Voice squelch
Mode
[FUNC][SCAN] accesses
menu [UP],[DOWN] to change
selec-tions sub-dial to adjust
setting
Search
Initiate [SRCH]
Bank link
Pause
Delay
Level squelch
Voice squelch
Auto store
[FUNC][SRCH] accesses menu
[UP],[DOWN] to change selec-
tions sub-dial to adjust setting
Search bank,
programming
[FUNC][1]
S, T
Select Scan,
add freq. to list
[FUNC][1]
Select Scan, initiate [FUNC][4] toggles on/off
Sleep timer, activate [FUNC][9] toggles on/off
Sleep timer, set [FUNC] press & hold [9]
Text, display [FUNC][ENT] toggle on/off
Please see the separate instruction manual for detailed explanation of specific functions by use purpose.
AOR, LTD.
2-6-4 Musuji, Taito-ku, Tokyo 111-0055 JAPAN
Tel: +81-3-3865-1695 Fax:+81-3-3865-1697
WEB : http://www.aorja.com/
e-mail : post@aorja.com
AR5000 Quick Reference Guide / First Edition, 1996.
Need help?
General
