AOR AR8200D - Page 6

94.8
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
67.0
71.9
74.7
77.0
79.7
82.5
85.4
88.5
91.5
97.4
69.4
159.8
165.5
171.3
177.3
183.5
189.9
196.6
199.5
206.5
229.1
254.1
CTCSS frequencies (in Hz)
3 VOICE INVERTER (ANALOG VOICE DESCRAMBLER)
(Not available for US consumer version)
Analog voice descrambler mode is used to decode scrambled analog voice transmission by frequency
inversion.
[Note]: This FUNCTION operates only in NFM mode.
To activate the function, perform the following steps:
1. In normal receive mode, double click the [CONTROL] switch located on the digital control unit.
(In the other modes, press and hold the [CLEAR] key for two seconds to remove “v nnn” from
the LCD.)
2. Double clicking the [CONTROL] switch will toggle through the APCO25 mode (one beep),
Voice Inverter mode (two beeps), and CTCSS mode (three beeps).
APCO25  Voice Inverter  CTCSS  APCO25  ………
3. To select the VOICE INVERTER mode, press and hold the [CLEAR] key for two seconds.