What to do if my AORUS Monitor has no power?
If your AORUS monitor isn't powering on, ensure the power cable is securely connected to both the monitor and the power source. Also, inspect the cable and plug for any signs of damage. Finally, verify that the monitor is switched on.
How to fix distorted colors on my AORUS AD27QD Monitor?
If the colors on your AORUS monitor appear distorted, first ensure the input signal cable is properly connected. If the issue persists, configure the image related settings.
Why does my AORUS AD27QD have no image on the screen?
If your AORUS monitor displays no image, first check that the monitor and computer are correctly connected and both are powered on. Next, ensure that you've selected the appropriate input source. You may also need to adjust the Brightness and Contrast settings.
Why is there no sound from my AORUS AD27QD or the volume is low?
If you're experiencing sound issues with your AORUS monitor, ensure the headphone cable is properly connected. Adjust the volume level and verify the Audio Source setting. If set to USB Codec, confirm the USB cable is securely connected to both the monitor and your computer. Also, check your computer's sound settings.
How to fix the image that doesn't fill the entire screen on my AORUS Monitor?
If the image on your AORUS monitor doesn't fill the entire screen, try different Display Mode (aspect ratio) settings.
General| Screen Size | 27 inches |
|---|---|
| Resolution | 2560x1440 (QHD) |
| Panel Type | IPS |
| Refresh Rate | 144Hz |
| Response Time | 1ms (MPRT) |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angles | 178°/178° |
| HDR | HDR400 |
| USB Ports | 2 x USB 3.0 |
| VESA Mount | 100 x 100 mm |
| Adaptive Sync | FreeSync |
| Inputs | 1 x HDMI 2.0, 1 x DisplayPort 1.2 |
| Speakers | 2 x 2W |
Essential safety guidelines for using the monitor to prevent hazards.
Instructions for attaching the monitor stand base securely.
Diagram showing connections for power, audio, and computer via HDMI/DP/USB.
Procedures for powering the monitor on and off using the control button.
Guide to choosing the active input signal for the monitor.
How to configure game-related settings and image optimization.
Technical specifications of the monitor including size, resolution, and power consumption.
Guidance on resolving common issues like no power or no image.
To Next Page
