APAR AR500 - Users Notes

16
0x1D (29) 0 ÷ 100
parameter 12: HSEt preset value of the manual mode
R/W
0x1E (30) 0 ÷ 9999
parameter 13: PASS password
R/W
0x1F (31) 1 ÷ 2
parameter 14: PPro protection of the configuration with a password
R/W
0x20 (32) 0 ÷3
parameter 15: FuncBIN input function
R/W
0x21 (33) 20 ÷ 100
parameter 16: briG brightness of the display, a 50% increase
R/W
0x22 (34) 0 ÷4
parameter 17: coLo basic color of the display
R/W
0x23 (35) 0 ÷5
parameter 18: AcoL alarm color of the display
R/W
0x24 (36) 1 ÷ 247
parameter 19: Addr MODBUS-RTU address in the RS485 network
R/W
0x25 (37) 0 ÷ 6
parameter 20: br speed for RS485
R/W
0x26 (38) -500 ÷ 500
parameter 21: cALo zero offset for measurements
R/W
0x27 (39) 850 ÷ 1150
parameter 22: cALG Slope calibration (sensitivity) for measurements
R/W
17. USER'S NOTES