CRS 40 V2
Installation, operation and service manual M2019/02a
3.2. TECHNICAL INFORMATION
Frequency range ISM 868 MHz:
Frequency modulation
Power
Duty cycle
869.525 MHz
18 dBm
<5%
Antenna integrated
Possible number of radio devices (E-ITN 30,
E-RM 30) per one unit A
All in the radio range (approx 350 units)
Max. quantity of a Units in A in one reading
network (per one unit B)
max. 10
Number of overlapping networks max. 15
Power supply: Unit A
Unit B
230 V / 5 mA / 50 Hz
230 V / 30 mA / 50 Hz
Recommended power supply cable Two-core H03VVH2-F 2X0,75 C
Three-core H03VV-F 3G0,75 CE
Note: connecting of the power supply NZCC1101 to the
230 V is protected with one fuse. Order of wires must be as
on the label N, L (L is protected)
Recommended batteries (unit A – for
installation)
Alkaline batteries, type AA, 1,5V
Note.: batteries must be removed before connecting unit A
to the mains 230 V power supply
IP code IP 40
Environment Intended for indoor use
Operation environment 0 – 40°C / rel. humidity <65%
Data output (unit type B) RJ45 (Ethernet), or via Wi-Fi or GSM
Data quantity Approx. 30 MB / month
(only includes meter reading network connection and
sending information via e-mail, direct access to the UI
depends on the amount of data transferred)
Supported browsers (for work with GUI) Mozilla Firefox 7.0 and higher
Internet Explorer 8.0 and higher
Google Chrome 15.0 and higher
Dimensions 255 x 205 x 68 mm
3.3. PACKAGE CONTENT
Before sending all units of central readings CRS 40 inspected at the factory. Upon receipt please check the
integrity and completeness. In the event of damage to the units immediately contact the transport company
or the manufacturer.
9 / 57
To Next Page
Loading...
Need help?
General