Power ModulePower Module
Power ModulePower Module
Power Module
The power module is a self-contained, 4kVA UPS (without
batteries) housed inside a metal enclosure. A blind mating
connector at the rear of the module engages with a connec-
tor inside the frame. Power modules are installed in the ver-
tical column of bays at the left of the frame. These bays are
labeled L1, L2, L3, etc.
1-Blind Mating Connector, 2-Positioning Handle,
3-Cooling Fan Grill, 4-Alignment Runners,
5-Seating Tabs, 6-Flip Latch Micro Switch
Fig 1-5 Power Module
In the event of a power module failure, the PowerView ini-
tiates an audible alarm and displays an error message. The
power module is hot-swappable. Instructions for module
replacement are provided in Chapter 8.
BatterBatter
BatterBatter
Batter
y Moduley Module
y Moduley Module
y Module
The battery module is comprised of a series of ten 12V bat-
teries housed inside a plastic enclosure. A blind mating con-
nector at the rear of the module engages with a connector
inside the frame.
Battery modules are installed in the vertical column of bays
at the right of the frame. These are labeled R2, R3, R4, etc.
(R1 houses the intelligence modules.) The condition and
charge of each battery module is reported on the PowerView.
If a battery module fails, an alarm is initiated. Battery mod-
ules are hot-swappable and user replaceable.
PowerPower
PowerPower
Power
view User Interview User Inter
view User Interview User Inter
view User Inter
faceface
faceface
face
The PowerView incorporates a 4 x 20 alphanumeric LCD
screen with four navigation keys, four LED status indicators,
and an audible alarm. The display communicates with the
Power Array via a short RJ45 connector cable that is hardwired
into the intelligence modules bay. The PowerView can be
mounted on the front of the frame, stand on top of the frame,
or it can be installed at a remote location. A 6.1m (20') RJ45
cable is provided for remote installation.
The alphanumeric LCD screen displays system status, fault
reporting, and module diagnostics information. The navi-
gation keys scroll through an elaborate menu. Chapter 6 pro-
vides detailed information about the PowerView.
Alarm thresholds and parameters are set with the PowerView.
In the event of an alarm condition, the PowerView emits both
audible and visual alarm indicators.
1-LED Status Indicators, 2-LCD Screen, 3-Navigation Keys
Fig 1-3 PowerView User Interface
Grill CoversGrill Covers
Grill CoversGrill Covers
Grill Covers
Each level of the frame is equipped with a grill cover. These
covers are interchangeable, and snap securely onto the frame.
When removing, temporarily storing, and replacing grill cov-
ers, use care to prevent them from being marred or scratched.
Fig 1-4 Front Grill Cover Removal and Replacement
1-2
Chapter 1 - Physical Representation
To Next Page
Loading...