Need help?Do you have a question about the APC Symmetra PX and is the answer not in the manual?
Explains the UPS user interface for configuration, monitoring, and alarms.
Describes the main status screen and accessing the top-level menu.
Details navigation, menu structure, and different types of status screens.
Covers setup, accessories, logging, display customization, diagnostics, and help screens.
Guides on performing total power off and turning the load ON/OFF.
Instructions for transferring to and from maintenance bypass operation.
How to adjust stabilizing feet for proper UPS placement and stability.
Steps to correctly re-start the UPS system after it has been powered off.
Connecting the UPS to a network via the Web Management Card.
Steps for initial IP address, subnet mask, and gateway setup.
Information on obtaining and replacing UPS components like modules and cards.
Step-by-step guide for safely removing and installing power modules.
Detailed instructions for safely removing and installing battery modules.
Procedure for replacing network management and other interface cards.
Explains common status messages and suggested corrective actions.
Lists common general faults and their corresponding corrective actions.
Addresses module failures and their corresponding corrective actions.
Covers threshold alarms and how to resolve them.
Explains bypass-related messages and corrective actions.
Explains the UPS user interface for configuration, monitoring, and alarms.
Describes the main status screen and accessing the top-level menu.
Details navigation, menu structure, and different types of status screens.
Covers setup, accessories, logging, display customization, diagnostics, and help screens.
Guides on performing total power off and turning the load ON/OFF.
Instructions for transferring to and from maintenance bypass operation.
How to adjust stabilizing feet for proper UPS placement and stability.
Steps to correctly re-start the UPS system after it has been powered off.
Connecting the UPS to a network via the Web Management Card.
Steps for initial IP address, subnet mask, and gateway setup.
Information on obtaining and replacing UPS components like modules and cards.
Step-by-step guide for safely removing and installing power modules.
Detailed instructions for safely removing and installing battery modules.
Procedure for replacing network management and other interface cards.
Explains common status messages and suggested corrective actions.
Lists common general faults and their corresponding corrective actions.
Addresses module failures and their corresponding corrective actions.
Covers threshold alarms and how to resolve them.
Explains bypass-related messages and corrective actions.
General| Noise level | 61 dB |
|---|---|
| Output power | 32000 W |
| Output power capacity | 32 kVA |
| Emergency Power Off (EPO) | Yes |
| Battery type | VRLA |
| Dimensions (WxDxH) | 1200 x 1070 x 1991 mm |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 3.5 h |
| Certification | EN 50091-1, EN/IEC 62040-3, EN/IEC 62040-1-1, FCC Part 15 Class A, VFI-SS-111 |
| Product color | Black |
| Operating altitude | 0 - 999.9 m |
| Non-operating altitude | 0 - 15000 m |
| Storage temperature (T-T) | -15 - 40 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Weight | 1095400 g |
|---|---|
| Package weight | 1189000 g |
To Next Page