Need help?Do you have a question about the APC SC1000 - Apc Smart-ups Sc 1000VA 120V and is the answer not in the manual?
Inspect the UPS upon receipt, check package contents, and handle packaging.
Specifies environmental conditions such as temperature and humidity for UPS placement.
Detailed instructions for physically mounting the UPS unit into a two-post rack.
Connecting external devices to the UPS via rear panel ports.
Instructions for connecting the UPS to a network using serial or surge protection ports.
Overview of the UPS front panel indicators, including overload and battery status.
Configuring UPS self-test frequency and unique identification.
Adjusting battery replacement date, minimum capacity, and shutdown delays.
Setting voltage sensitivity and alarm delays after line failures.
Setting low battery alerts and delay before UPS turns on after power return.
Adjusting high and low voltage transfer points for optimal operation.
Recommendations for storing the UPS in suitable environmental conditions.
Steps and considerations for replacing the UPS battery module.
A guide to resolving typical UPS installation and operation problems.
Instructions for safely shipping the UPS and obtaining professional service.
Details on how to contact APC customer support for assistance.
Regulatory compliance information for 110/120 V and 230 V UPS models.
Official declaration of conformity with relevant European directives.
Explains the terms and conditions of the two-year limited warranty.
To Next Page
General