Need help?Do you have a question about the APC SMART-UPS 750 and is the answer not in the manual?
Detailed description of the APC Smart-UPS 750-3000 VA rack-mount UPS.
Safety precautions and guidelines for installing and using the UPS.
Identifies front panel components and their functions.
Identifies and describes the ports and connectors on the rear panel of the UPS.
Specifies the environmental and operational conditions for UPS placement and use.
Details environmental factors like temperature, humidity, and elevation limits.
Instructions for UPS installation, referring to the Quick-Start Guide.
Information on installing the Network Management Card (NMC) and its manual.
Step-by-step guide on connecting equipment and the UPS to power.
Description of the serial port, USB port, and ground screw on the rear panel.
Identifies display components and explains how to navigate menus using buttons.
Details common UPS information and settings available in standard menus.
Explains advanced features and settings available through advanced menus.
Configure initial UPS settings like language and local power quality.
Settings for UPS operation including transfer point and sensitivity.
Configure main and switched outlet groups for equipment control and sequencing.
Settings for configuring the Network Management Card (NMC) via external interface.
Explains the EPO feature for immediate shutdown and its safety implications.
Wiring instructions for normally open EPO contacts.
Wiring instructions for normally closed EPO contacts.
Provides solutions for common UPS operational problems and error messages.
Steps to follow for servicing the UPS, including contacting support and returning the unit.
Guidelines for safely preparing and shipping the UPS unit.
Information on how to contact APC customer support globally via web, phone, or email.
Details the terms, conditions, and limitations of the UPS factory warranty.
Detailed description of the APC Smart-UPS 750-3000 VA rack-mount UPS.
Safety precautions and guidelines for installing and using the UPS.
Identifies front panel components and their functions.
Identifies and describes the ports and connectors on the rear panel of the UPS.
Specifies the environmental and operational conditions for UPS placement and use.
Details environmental factors like temperature, humidity, and elevation limits.
Instructions for UPS installation, referring to the Quick-Start Guide.
Information on installing the Network Management Card (NMC) and its manual.
Step-by-step guide on connecting equipment and the UPS to power.
Description of the serial port, USB port, and ground screw on the rear panel.
Identifies display components and explains how to navigate menus using buttons.
Details common UPS information and settings available in standard menus.
Explains advanced features and settings available through advanced menus.
Configure initial UPS settings like language and local power quality.
Settings for UPS operation including transfer point and sensitivity.
Configure main and switched outlet groups for equipment control and sequencing.
Settings for configuring the Network Management Card (NMC) via external interface.
Explains the EPO feature for immediate shutdown and its safety implications.
Wiring instructions for normally open EPO contacts.
Wiring instructions for normally closed EPO contacts.
Provides solutions for common UPS operational problems and error messages.
Steps to follow for servicing the UPS, including contacting support and returning the unit.
Guidelines for safely preparing and shipping the UPS unit.
Information on how to contact APC customer support globally via web, phone, or email.
Details the terms, conditions, and limitations of the UPS factory warranty.
General| Output Power Capacity | 500 Watts / 750 VA |
|---|---|
| Nominal Output Voltage | 120V |
| Nominal Input Voltage | 120V |
| Waveform Type | Sine wave |
| Output Connections | (6) NEMA 5-15R |
| Control panel | LED status display with On Line: On Battery: Replace Battery and Overload indicators |
| Form Factor | Tower |
| Battery Type | Lead-acid battery |
| Transfer Time | 6 ms typical |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Typical Recharge Time | 3 hours |
| Interface Port(s) | USB |
| Output Voltage | 120V |
| Communication Ports | USB |
To Next Page
