Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount6
Advanced menus
The Advanced menus provide additional options for the UPS and are available only if the display
interface is configured to use the Advanced menus.
About Display information about this unit:
• Unit model number
• Serial number
• Battery information
•Model number
•Installation date
•Suggested battery replacement date
•UPS firmware version
Menu General Functions
Status View detailed information about the UPS:
• Energy meter
• Load current
• Status of the Switched Outlet Group
• Battery voltage
• Operation mode
• Efficiency
Configuration Configure advanced settings for the UPS:
• Main and Switched Outlet Group—delays and settings
• High and lower transfer points
• Sensitivity settings
• Date of last battery replacement
• Output voltage
• Battery settings
• Number of battery packs (not available on all models)
• Reset energy meter
• UPS test settings
Control Control the Main and Switched Outlet Group to turn on,
turn off, shutdown, or reboot.
Test & Diags Perform UPS test and diagnostic functions such as user
interface testing, battery tests, and battery calibration.
Log View the event and error logs for information about any
changes to the UPS and any faults.
About View information about the unit:
• Hardware version
• Software version
• NMC information (if applicable)
• SmartSlot Card information (if applicable)
Menu General Functions
To Next Page
Loading...
Need help?
General
