Need help?Do you have a question about the APC Smart-UPS 2200 and is the answer not in the manual?
General| Nominal Output Voltage | 230V |
|---|---|
| Nominal Input Voltage | 230V |
| Rack Height | 2U |
| Input Voltage Range | 160 - 286 V |
| Waveform Type | Sine wave |
| Interface Port | USB |
| Typical Recharge Time | 3 hours |
| Form Factor | Rackmount/Tower |
| Frequency | 50/60 Hz |
| Battery Type | Sealed Lead Acid (SLA) |
Covers essential safety guidelines and general operating practices for the UPS.
Provides an overview of the APC Smart-UPS features and capabilities.
Guides users through unpacking, inspecting, and positioning the UPS unit.
Details the procedure for connecting the UPS battery module.
Instructions for connecting the UPS to power sources and connected equipment.
Steps to power on the UPS and initiate its operation.
Explains network connectivity and the Emergency Power Off (EPO) feature.
Describes the UPS display panels and their indicators.
Explains the functions of the UPS control buttons like Power On/Off and Self-Test.
Details configuration options like self-test intervals, UPS ID, and sensitivity.
Covers settings for low battery warning, transfer points, and output voltage.
Provides guidance on storing the UPS and seeking service if needed.
Instructions and considerations for replacing the UPS battery module.
Offers solutions for common UPS installation and operational problems.
Outlines the terms and conditions of the product's factory warranty.
To Next Page
