APC SMART-UPS 750 User Manual

1Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount
Overview
Product Description
The APC
®
by Schneider Electric Smart-UPS
®
750-3000 VA 120/208/230 Vac Rack-mount is a high
performance uninterruptible power supply (UPS). It provides protection for electronic equipment from
utility power blackouts, brownouts, sags, and surges; small utility fluctuations and large disturbances.
The UPS also provides battery backup power until utility power returns to safe levels or the batteries are
fully discharged.
Safety
Read the Safety Guide included in the package before installing the UPS.
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
Recycle the packaging.
Product Overview
Front panel

Battery

Battery connector
*This will vary by model.

Display interface

Bezel
su0498a

APC SMART-UPS 750 Specifications

General

Output Power Capacity	500 Watts / 750 VA
Nominal Output Voltage	120V
Nominal Input Voltage	120V
Waveform Type	Sine wave
Output Connections	(6) NEMA 5-15R
Control panel	LED status display with On Line: On Battery: Replace Battery and Overload indicators
Form Factor	Tower
Battery Type	Lead-acid battery
Transfer Time	6 ms typical
Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Typical Recharge Time	3 hours
Interface Port(s)	USB
Output Voltage	120V
Communication Ports	USB