APC PX - PowerView LED Indicators and Navigation Keys

Chapter 6 - The PowerView Display
6-2
Navigation KeysNavigation Keys
Navigation KeysNavigation Keys
Navigation Keys
The four navigation keys on the PowerView interface are used
to select and open menu items, to access information, and to
change system parameters. A small "selection arrow" at the
left side of the display screen indicates the menu item or pa-
rameter that is selected. The navigation keys are described in
Table 6-2.
lobmyS
yeKno
emaN
yeKfo
yeKfonoitcnuF
csE
EPACSE stixeyekEPACSEehT
dnaneercstnerruceht
ylsuoiverpehtotsnruter
.neercsdeyalpsid
↑
PU ehtsevomyekPUehT
.drawpuworranoitceles
↓
NWOD sevomyekNWODehT
worranoitceleseht
.drawnwod
↵
RETNE snepoyekRETNEehT
ro,unemdetceleseht
retemarapasnepo
.tsilnoitceles
Table 6-2 PowerView Navigation Keys
PowerVPowerV
PowerVPowerV
PowerV
iew LED Indicatorsiew LED Indicators
iew LED Indicatorsiew LED Indicators
iew LED Indicators
Four LED indicators report the operational status of the Power
Array. Table 6-1 describes their function.
DEL roloC noitpircseD
NODAOLneerG siyarrArewoPehtsetacidnI
enil-noehtnignitarepo
simetsysehT.edom
ehtmorfrewopgniviecer
sidna,ecruosrewopsniam
denoitidnoc,naelcgniylppus
.tnempiuqedaolotrewop
TTABNOwolleY sniamatahtsetacidnI
,derruccosaheruliafrewop
daolehtotrewoptahtdna
deilppusgniebsitnempiuqe
.seludomyrettabehtmorf
SSAPYBwolleY ehtotrewoptahtsetacidnI
deilppusgniebsidaol
sniamehtmorfyltcerid
rewoPehT.ecruosrewop
ylevitceffeneebsahyarrA
.tiucricehtmorfdevomer
TLUAFdeR yarrArewoPehtsetacidnI
lanretninadetcetedsah
mralanA.noitidnoctluaf
ehtnoraeppalliwegassem
.yalpsidDCLweiVrewoP
).9retpahCeeS(
Table 6-1 Power Array Display LEDs