11
3.
For Porcelain Sink: Porcelain enameled sinks can readily be chipped if care is not exercised when
drilling the hole. Before starting the drill motor, apply firm downward pressure on the bit until a
crunching occurs. This will help keep the drill bit from walking when starting the hole. A small pilot
hole will also aid the drill bit.
Note: Immediately after the hole drilling is done, clean up all metal chips, for metal chips will
stain the porcelain!!
Step 4: Mounting The Faucet
1. Mount the faucet as shown in Fig. 9.
2. Connect the Clear line to the faucet.
3. The faucet has a solid metal handle that controls the flow of purified water exiting the faucet. Turn
the handle to horizontal position to release the water and vertically to shut off.
Chrome Base
To Next Page
Loading...
