GB
11
Regulator Owner’s Manual
............................................................................................
CAUTION! Ensure location
grooves are free from dirt and
debris.
3. Refitting the exhaust diffusers
is carried out by sliding ONE
diffuser at a time onto the
case, once both diffusers are
located on the case, squeeze
the two diffusers together until
you hear an audible “click”.
NOTE: The removal and
refitting of the small exhaust
diffusers is carried out in
exactly the same way as the large exhaust diffusers. If the exhaust
diffusers do not securely clip together then they may become
detached and lost. (If required, exhaust diffusers may be purchased
separately).
WARNING: Do not attempt to use tools to remove or attach the
exhaust diffusers. After the removal of the exhaust diffusers, care
must be taken to prevent damage to the exhaust valve. Do not
attempt to poke, pull or touch the exhaust valve or surrounding
area with any tools. If damage to this part or surrounding area
occurs then this could cause your regulator to leak, causing
serious malfunction or even personal injury. Care must be
taken when securing alternative sets of diffusers, do not apply
excessive force as damage may occur to the diffusers, exhaust
valve or surrounding area.
Shaded area
indicates
exhaust
valve and
surrounding
area.
Showing
Compact
Exhaust Option
LOCATE
SLIDE
To Next Page
Loading...
Need help?
General
