GB
10
Regulator Owner’s Manual
............................................................................................
Diver Changeable Exhaust system (DCE)
The Diver Changeable Exhaust (DCE) offers the choice of either a
compact lightweight system or a longer exhaust diffuser. DCE can be
configured to prevent virtually any bubble interference from obscuring the
diver’s view.
The exhaust diffusers can be easily and very quickly changed by sliding
and locking the preferred set into place. Divers can now configure
their own regulator exhaust diffusers for individual dive conditions or
requirements.
By pressing the securing button in the centre of the exhaust diffuser and
at the same time sliding the diffusers apart, they can be removed quickly
and easily.
To attach an alternative set of exhaust diffusers, align the slide locations
as shown and slide each side into place, taking care that the exhaust
diffusers are located securely. When the two diffusers meet, squeeze them
together until an audible “click” is heard from the retaining button.
1. First, gently press the button located in the centre of the exhaust
diffuser.
2. Then slide both exhaust diffusers apart, whilst keeping the button
depressed.
CAUTION! Do not use any tools to aid the
removal of the exhaust diffusers.
PRESS
HERE
To Next Page
Loading...
Need help?
General
