Apeks DS4 User Manual

GB
33
Regulator Owner’s Manual
............................................................................................
Cleaning The Swivel Joint
(1) Slide back the
hose protector as
shown left
(2) Rinse the assembly
with fresh water.
(3)Push the hose
protector back so that the
cup sits tightly on the ball
joint cap.
CAUTION! Do not use
detergents or solvents
as this could damage
the swivel components
and o-rings.

Apeks DS4 Specifications

General

HP Ports	1
LP Ports	4
Environmental Sealing	Yes
Nitrox Compatibility	Yes
Mount Type	DIN
Maximum Working Pressure	232 bar
Inlet Connection	DIN
Material	Marine brass