9
Diver Changeable Exhaust system (DCE)
The Diver Changeable Exhaust (DCE) offers the choice of either a
compact lightweight system or a longer exhaust diffuser. DCE can be
configured to prevent virtually any bubble interference from obscuring
the diver’s view.
The exhaust diffusers can be easily and very quickly changed by
sliding and locking the preferred set into place. Divers can now
configure their own regulator exhaust diffusers for individual dive
conditions or requirements.
By pressing the securing button in the centre of the exhaust diffuser
and at the same time sliding the diffusers apart, they can be removed
quickly and easily.
To attach an alternative set of exhaust diffusers, align the slide
locations as shown and slide each side into place, taking care that the
exhaust diffusers are located securely. When the two diffusers meet
squeeze them together until an audible click is heard from the
retaining button.
1. First gently press the button located
in the center of the exhaust diffuser.
CAUTION! Do not use any tools
to aid the removal of the
exhaust diffusers.
2. Then slide both exhaust diffusers
apart, while keeping the button
depressed.
PRESS HERE
To Next Page
Loading...
Need help?
General
