Apeks XL4+ - Page 15

TABLE 2: LIST OF TOOLS
PART # DESCRIPTION APPLICATION
RG911161
Diaphragm Clamp Tool Removal/installation of inner locking ring (4)
RA911143
RA911141
Brass O-ring
Tool Kit
Plastic O-ring
Tool
Removal and replacement of o-rings
RA911116
Lever Setting Tool Setting lever height
RG911227
Micro Adjuster Tool
Setting micro adjuster screw (23). Remove/replace spindle
body assembly
RG911232
Venturi Lever Tool Removal of venturi lever (24)
RA911123
Inline Adjuster
Tool
Adjusting lever height
N/A
(11/16”, 13/16”) Wrench
Disassembly and assembly
N/A
(2.5mm, 5mm) Hex Key Removal/installation of seat (14), Micro adjuster (23)
N/A
Torque Wrench Apply torque to parts listed in Table 3: Torque Specications
N/A
(11/16”, 13/16”) Crow Foot Apply torque to parts listed in Table 3: Torque Specications
N/A
Side Cutters Trim exhaust valve
N/A
Magnier with
Illumination
Sealing surface inspection
N/A
Ultrasonic Cleaner Brass and stainless steel parts cleaning
N/A
Christo-Lube
MCG-111
Lubrication
N/A
Powderless Latex Gloves or Finger Cots Keep nger oils off of parts
N/A
Test Bench For testing
RS135111
Second Stage Service Kit Service parts
15
XL4 SECOND STAGE TECHNICAL MAINTENANCE MANUAL