Official Support: kt.support@apemans.com
please press the POWER/OK button to turn on the camera manually.
Then press this button again to start recording.
When the Dash Cam is recording, REC Light in the upper left corner of
the camera flashes, and a flashing Red Dot appears in the upper left
corner of the screen. As shown below.
C. How to Stop Recording
When the Dash Cam is recording, simply press the the POWER/OK
button to stop recording. For most cars (this also depends on the
model), the camera will automatically stop recording and shut down
when the engine goes off.
D. How to Switch to Photo Mode
The MENU button is also a MODE SWITCH button. Turning on the
Dash Cam, then long press the MENU button to enter the Photo
Mode. You can take photos from here by pressing the POWER/OK
button.
To Next Page
Loading...
