Official Support: kt.support@apemans.com
"Format" option.
5. Press the POWER/OK button, and press DOWN button and the
POWER/OK button again to select Confirm.
2. Getting to Know the Camera Body
A. Interfaces
There are 4 interfaces:
Hard Reset Hole: If your camera doesn't turn on while charging,
you can insert the pin provided into the pinhole for about three
seconds. This will hard reset the camera. If the camera can be
turned on, you can reset it in the menu.
MicroSD Card Slot: Slide the compatible card into the slot in the
right direction (with the metal contact going into the slot first and
away from you) until it clicks into place. If you feel the SD card
cannot be inserted into the place, please use your fingernail to
push the card in.
Mic: Microphone
Micro USB Port: This should be connected to the micro USB
connector of the car charger cable provided in the package. The
other end of the car charger cable is connected to the cigarette
lighter.
To Next Page
Loading...
