Apera Instruments EC60 Manual

- 7 -
8 Technical Specifications
Conductivity
Range
0-200.0 µS, 0-2000 µS, 0-20.00 mS
Resolution
0.1/1 µS, 0.01 mS
Accuracy
±1% F.S
Calibration
1-3 points automatic calibration
TDS
Range
0-100,0 ppm, 0-1000 ppm, 0-10.00 ppt
Resolution
0.1/1 ppm, 0.01 ppt
Salintiy
Range
0-10.00 ppt
Resolution
0.01 ppt
Temperature
Range
0-50˚C
Resolution
0.1˚C
Accuracy
±0.5˚C
9 Other Functions and Parameters:
Screen
STN 180˚ viewing angle.
Blue backlit: measuring mode; Green backlit: calibration mode
Readings’ Lock
HOLD
Low battery reminder
flashes to remind to replace batteries
Automatic power-off
Auto power-off if no operation in 8 minutes
Waterproof level
IP67, floats on water
Power supply
AAA batteries*4
Battery Life
1000 hours
Dimensions/Weight
Meter: 40*40*178mm/133g
Carrying case: 255*210*50mm/438g
10 Probe Replacement
Twist off the probe ring, unplug the probe, plug in the new replacement probe (pay attention
to the electrode’s position), and screw on the probe ring. The model for EC60 tester’s
replacement probe is EC60-E (AI209)

Apera Instruments EC60 Specifications

General

Brand	Apera Instruments
Model	EC60
Category	Test Equipment
Language	English