Apex Digital iX Fit - Page 17

iX Fit / English 14
Check Code
Your home care provider may ask for this information.
Humidity Level (optional)
Setting : Press "MENU" to enter Humidity Level menu press
"UP" or “DOWN” to adjust Humidity Level  press "CONFIRM"
to save change
(Options : 1~6 levels)
Level 1 : provides lower humidity
Level 6 : provides higher humidity
Note: Only when Heated Humidifier has been attached.
Altitude Compensation
Setting : Press "MENU" to enter Altitude Compensation menu
press "UP" or “DOWN” to adjust altitude compensation Level from
1 to 8  press "CONFIRM" to save change
Note: Users can operate iX Fit at a wide range of altitude within
0~8000 ft. The altitude function provides a method of accuracy
pressure output at high altitude. Users must follow the below table
to select the correct altitude setting depending on your elevation
above. The device will automatically regulate airflow output to
achieve targeted pressure at a high altitude. Otherwise, the wrong
altitude setting will cause an inaccurate pressure output.
The level should be set depending on your elevation above sea
level. The below table is the comparison of the altitude setting and
altitude.
Altitude
Setting
Altitude (Imperial)
Altitude (Metric)
1
0 ~ 1000 ft
0 ~ 304 m
2
1001 ~ 2000 ft
305 ~ 609 m
3
2001 ~ 3000 ft
610 m ~914m
4
3001 ~ 4000 ft
915 m ~1219m
5
4001 ~ 5000 ft
1220 m ~1524m
6
5001 ~ 6000 ft
1525 m ~1829m
7
6001 ~ 7000 ft
1830 m ~2134m
8
7001 ~ 8000 ft
2135 m ~2438m