Apex Digital iX Fit - Error Messages on LCD

iX Fit / English 21
Error Messages shown on LCD
The table below lists Error and Alarm solutions for the issue that may happen. If the issue persists,
contact your care provider’s service agent or APEX. Do not Open the device.
Message
type
Message in
LCD
Definition
Troubleshooting
Error
E001
Remove the Humidifier
during treatment
Do not remove the humidifier during
treatment.
E100-XX
System fault
(primary function can be
executed)
1. Press any buttons to return to standby
mode.
2. Contact your equipment provider. Do
not open the device.
E101-XX
System fault
(primary function cannot
be executed)
Contact your equipment provider. Do not
open the device.