Apex Digital iX Fit - Technical Specifications; Device Specifications

iX Fit / English 22
7. Technical Specifications
7.1 Device
Item
Specifications
Power Supply
60W, DC 24V, 2.5A
Power Adapter
AcBel Polytech Inc., Model No.: ADH008
Input: 100-240V, 50/60Hz, 1.5~0.75A
Output rating: 24VDC, 2.5A, 60W
Mode of Operation
CPAP
Pressure Range
4 ~ 20 cmH
2
O (adjustable in 0.5 cmH
2
O increment)
Ramp Time
0 ~ 45 minutes (adjustable in 5 minutes increment)
Ramp Starting Pressure
4 ~therapy pressure cmH
2
O (adjustable in 0.5 cmH
2
O increment)
Altitude Compensation
(Manual setting)
Level 1~8 for 0 ~ 8000 ft when the pressure is set at 4-20cmH
2
O
Dimensions (W x D x H)
14.1 x 14.5 x 10.6cm ; 23.5 x 14.5 x 14.7cm (with humidifier)
Weight
Approximately 900 g ; 1490g (with humidifier)
Environment
Temperature
Operating: +5° C ~ +35° C
Storage: -15º C ~ +50º C
Transport: -15º C ~ +60º C
Note: The device is suitable for use after 60 minutes from the -15º C to
ambient temperature(20 °C).
Note:The device is immediately suitable for use from +50º C to
ambient temperature(20 °C).
Humidity
Operating: 15%RH ~ 95%RH, non-condensing
Storage: 10%RH ~ 90%RH, non-condensing
Transport: 10%RH ~ 90%RH, non-condensing
Altitude
Operating: Sea level to 2,438 m; air pressure range 1060 hPa to 752
hPa
Classification:
Class II
Type BF, Applied Parts : Mask.
Not suitable for use in the presence of a flammable anesthetic mixture.
IP22
Air Tubing
APEX Light Gray Tubing – 15mm
REF : SF00022
Flexible plastic, 1.83m
Operating/Storage/Transport conditions are the same as device.