Apex Digital XT Auto - Menu Settings Flowcharts; CPAP Mode Menu Flow; APAP Mode Menu Flow

XT Auto/ English 11
4.4 flowchart of Menu settings
Enter the user's menu mode by pressing the “MENU” button.
In each setting, when the preferred value has been selected, press
“MENU” for confirmation and
press
“MENU” again to enter next selection.
NOTE: For physicians, please refer to a separated “Physician’s Additional Instruction” page.
Ramp
(Ramp Time)
< 0 ~ 45 > min
P
(Therapy Pressure)
< 4.0 ~ 20.0 > cmH
2
O
CM
(Compliance Meter)
< xxxx.x > hr
Ramp P
(Ramp Starting
Pressure)
Low P
(Low Pressure Shut Off)
< on/off >
Alarm
< on/off >
Clock Alarm
< on/off >
Clock
< hh:mm >
CPAP
CPAP
Mode
Int. P
(Initial Pressure)
< 4.0 ~ 19.0 > cmH
2
O
Max. P
(Maximum Pressure)
< 5.0 ~ 20.0 > cmH
2
O
APAP
A
PAP
Mode
Min. P
(Minimum Pressure)
< 4.0 ~ 19.0 > cmH
2
O
Clock Alarm <On>
< hh:mm >
C
(PVA Comfort Level)
< on/off >
C
(PVA Comfort Level)
< on/off >
PVA <On>
< 0, 1, 2, 3 >
PVA <On>
< 0, 1, 2, 3 >
Ramp
(Ramp Time)
< 0 ~ 45 > min