Apollo Seiko OMEGA - Page 26

26 / 60
13.4.2 Soldering Operation by Serial Communication Port
It needs to set a suitable WK No. in Solder condition setting in advance.
Robot
Board
I Command
1st Solder Feeding
1st Solder Reversing
Iron Down
Pre-heating Time
Waiting
Solder Pool Time
Waiting
i Command
H Command
j Command
Movement Start
SV2 Setting
Temperature Rising
Solder Pool Time
Waiting
2nd Solder Reversing
Heating Time Waiting
2nd Solder Feeding
3rd Solder Feeding
3rd Solder Reversing
k Command
Iron Up