Apollo Panda - Page 14

Solarpaint
AL1206 Installation Manual
14.9.2023
Rev. [B1]
Page 14 of 28
Example: Horizontal and vertical installation on trapezoidal steel deck
d) Module application on PVC waterproofing membranes
1) Apply a thin layer of adhesive (3-4mm height) along the surface of the roof while
keeping a minimum distance from the module edges (see Example below). The
adhesive should be applied in segmented lines.
2) Apply two middle adherence lines (Note: To allow the adhesive to cure properly, do
not form a "closed" shape)
Example No.1: Adherence of one AL1206 module on a flat surface