APO timer: 1min to 30min, or OFF
Buzzer ON or OFF
Backlight mode: Auto, ON or OFF
Temperature default unit: °C or °F
Setup Options
Auto-Hold mode ON or OFF
Cntin
Press ENTER to reset all setup options.
APO
A.Hold
b.Lit
bEEP
diGit
TEMP
RESET
Continuity threshold: 10Ω to 50Ω
Display digit: Lo or Hi
IR Communications
You can use the IR (infrared) communication link and
WinDMM software to transfer the real-time data of
meter to PC. In addition, the meter allows the user to
log to internal memory and connect to the computer
later for download.
For detailed information, refer to the WinDMM Installa-
tion Guide or the on-line help.
Maintenance
Verify the meter’s operation by measuring a known
voltage. If in doubt, have the meter serviced. Do not
attempt to repair this meter. It contains no user
serviceable parts. Repair or servicing should only be
performed by qualified personnel. To maintain best
accuracy, calibrate meter once a year.
Cleaning
Periodically wipe the case with a dry cloth and deter-
gent. Do not use abrasives or solvents.
501 / 502
EN
To Next Page
Loading...
