Need help?Do you have a question about the Applanix POS MV V5 and is the answer not in the manual?
Describes the FDIR feature for system reliability and error correction.
Provides special handling precautions for IMU, PCS, and GNSS antennas to prevent damage.
Explains the importance of measuring and entering physical installation parameters for optimal performance.
Guides on measuring and resolving mounting angles for system alignment with a chosen reference frame.
Details the two-stage process for powering on the POS MV system.
Provides procedures to diagnose and isolate various system failures including total system failure and initialization failure.
Provides troubleshooting procedures to identify and resolve Ethernet communication failures.
General| Velocity Accuracy | 0.005 m/s |
|---|---|
| Data Output Rate | Up to 200 Hz |
| Type | Inertial Navigation System |
| Position Accuracy | 0.02 m (RTK) |
| Heading Accuracy | 0.02° |
| Roll and Pitch Accuracy | 0.01° |
| Heave Accuracy | 5 cm or 5% |
| Supported GNSS | GPS, GLONASS, Galileo, BeiDou |
| Data Output | Ethernet, Serial |
| Power Supply | 10-36 VDC |
| Applications | Marine |
| IMU Type | Fiber Optic Gyro (FOG) |
To Next Page