BIOS SETTING
NP-3262 POS Terminal 33
Restore AC Power Loss by IO
This setting specifies how your system should behave after a power fail or
interrupts occurs.
Power Off: Leaving the system in power-off status after power recovers.
Power ON: Powering on the system immediately when power returns.
Last State: 1. Leaving the system in power-off if the system shuts down at DC off
status;
2. Powering on the system immediately if the system shuts down at
DC on status.
Options: Power Off (Default) / Power On / Last State
Watch Dog Degree
This item allows you to determine the functional degree of Watch Dog.
Options: Second (Default) / Minute
Watch Dog Timer
Options: 0 for disabled (Default) / Min=1, Max=65536
H/W Monitor
To Next Page
Loading...