BIOS SETTING
48 NP-3262 POS Terminal
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, it allows the Option ROMs to trap Interrupt
19.
Options: Disabled (Default) / Enabled
Boot Success Beep
When this item is set to Enabled, BIOS will let user know boot success with
beep.
Options: Enabled (Default) / Disabled
UEFI Boot
This item enables or disables boot from the UEFI Devices.
Options: Disabled (Default) / Enabled
Boot Option Priorities
Items in this sub-menu specify the boot device priority sequence from the
available devices. The number of device items that appears on the screen
depends on the number of devices installed in the system.
Hard Disk Drive BBS Priorities
The BIOS will attempt to arrange the hard disk boot sequence automatically.
You
can also change the booting sequence. The number of device items that
appears on
the screen depends on the number of devices installed in the system.
To Next Page
Loading...