APsystems DS3 series User manual
8.1 DS3 series Microinverter Datasheet
Nominal Output Voltage/Range
(1)
Nominal Output Frequency/ Range
(1)
Power Factor (Default/Adjustable)
0.99/0.8 leading…0.8 lagging
Maximum Units per 2.5mm² Branch
(2)
Maximum Units per 4mm² Branch
(2)
Operating Ambient Temperature Range
(3)
Storage Temperature Range
Stäubli MC4 PV-ADBP4-S2&ADSP4-S2
Natural Convection - No Fans
Enclosure Environmental Rating
Communication (Inverter To ECU)
(4)
High Frequency Transformers, Galvanically Isolated
Energy Management Analysis (EMA) system
10 Years Standard ; 15 Years Optional
(1) Nominal voltage/frequency range can be extended beyond nominal if
required by the utility.
(2) Limits may vary. Refer to local requirements to define the number of
microinverters per branch in your area.
(3) The inverter may enter to power de-grade mode under poor ventilation and
heat dissipation installation environment.
(4) Recommend no more than 80 inverters register to one ECU for stable
communication.
(5) To be eligible for the warranty, APsystems microinverters need to be
monitored via the EMA portal. Please refer to our warranty T&Cs available on
apsystem.com.au
© All Rights Reserved
Specifications subject to change without notice
please ensure you are using the most recent update
found at web : apsystem.com.au