APsystems DS3D - DS3 D 3-phase Microinverter Datasheet

APsystems Microinverter DS3D User Manual
19
8.1 DS3D 3-phase Microinverter Datasheet
Region
Brazil
Input Data (DC)
Recommended PV Module Power (STC) Range
315Wp-670Wp+
Peak Power Tracking Voltage
64V-110V
Operating Voltage Range
52V-120V
Maximum Input Voltage
120V
Maximum Input Current
20A x 2
Output Data (AC)
Maximum Continuous Output Power
2000W
Nominal Output Voltage/Range
*
220V/ 176V-242V
Adjustable Output Voltage Range
170V-278V
Nominal Output Current
9A
Nominal Output Frequency/ Range
*
60Hz/57.5Hz-62Hz
Adjustable Output Frequency Range
55Hz-65Hz
Maximum Units per 30A Branch
**
3
Efficiency
Peak Efficiency
97%
CEC Efficiency
96.7%
Nominal MPPT Efficiency
99.5%
Night Power Consumption
20mW
Mechanical Data
Operating Ambient Temperature Range
-40 °C to +65 °C
Storage Temperature Range
-40 °C to +85 °C
Dimensions (W x H x D)
283mm X 233mm X 48.4mm
Weight
3.8kg
DC Connector Type
Stäubli MC4 PV-ADBP4-S2&ADSP4-S2
Cooling
Natural Convection - No Fans
Enclosure Environmental Rating
IP67
Features
Communication (Inverter To ECU)
Encrypted ZigBee
Isolation Design
High Frequency Transformers, Galvanically Isolated
Energy Management
Energy Management Analysis (EMA) system
Compliances
Compliances
ABNT NBR 16149:2013; ABNT NBR 16150:2013;
ABNT NBR IEC 62116: 2012
2021/11/19 Rev1.0
*Nominal voltage/frequency range can be extended beyond
nominal if required by the utility.
**Limits may vary. Refer to local requirements to define the number
of microinverters per branch in your area.
© All Rights Reserved
Specifications subject to change without notice please ensure you are
using the most recent update found at web : latam.APsystems.com