APsystems Microinverter DS3D User Manual
1.Important Safety Instructions
1.2 Radio Interference Statement
EMC Compliance： The APsystems Microinverter can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful interference to
radio communication.
APsystems Microinverter complies with EMC regulations, which are designed to provide
reasonable protection against harmful interference in a residential installation.
Nonetheless, if the Microinverter does cause harmful interference to radio or television
reception, you are encouraged to try to correct the interference by one of more of the
following measures:
A) Reorient or relocate the receiving antenna
B) Increase the separation between the Microinverter and the receiver
C) Connect the Microinverter into an outlet on a circuit different from that to which the
receiver is connected
If none of the recommendations suggested above bring significant improvement in terms of
interference, please contact your local APsystems Technical Support.
To Next Page
Loading...
