ECU-C Installation/User Manual
5.ECUAPP
5.2 Add UID
Click "Settings", select "ID Management", input the UID manually or
scan the UID by camera. If there is no need to modify, then click "SYNC"
to update the UIDs onto ECU.
5.3 Delete UID
Select the UIDs, click "DELETE" then click "SYNC". The UIDs selected
are deleted on the ECU-C.
5.4 Homepage
Click "Home" at the bottom of the page.
The information about systems info of ECU-C,
ECU-C ID, version , total number of
inverters, the number of connected
inverters, intraday power output, historical
power output and current system power shall
be displayed.
To Next Page
Loading...
