APsystems ECU-C - Setting the ECU-C Time Zone; Managing Inverter Ids and Updating the Inverter ID List

ECU-C Installation/User Manual
34
7.Remote ECU-C Management (EMA)
7.2 Setting the ECU-C Time Zone
1) Click the remote control menu to enter the remote settings page
2) Select the “ECU-C SETTING” tab.
The ECU-C Configuration page is displayed.
Time Zone Pull Down Field
Figure 23
3) Using the “Time Zone” pull down field, select the appropriate time zone.
4） Press “Send”.
7.3 Managing Inverter IDs and Updating the Inverter ID List
1) Select the “ECU-C SETTING” tab.
The Inverter Links Configuration page is displayed
Inverter Links
Figure 24