APsystems ECU-C - 3.Hardware Installation; 3.1 Preparation; 3.2 Selecting an Installation Location for the ECU-C

ECU-C Installation/User Manual
7
3.Hardware Installation
3.1 Preparation
Make sure you have the following components ready before beginning to install
the ECU-C:
 A broadband Internet connection available for your use.

A broadband router with either a CAT5 Ethernet, or a wireless router .
 A laptop with a web browser (to view the APsystems EMA online
monitoring application).
 A pre-programmed ECU-C.
3.2 Selecting an Installation Location for the ECU-C
 Choose a location that is electrically as close to the array as possible.
 The ECU-C is NOT rated for outdoor use, so if installing outdoors near a
junction box or breaker panel, make sure you enclose it in an
appropriate weatherproof NEMA electrical box.

Avoid to install in the place children can not touch.
1) Power Distribution Cabinet Installation
If you use the energy communicator in power distribution cabinet:

Pull the four snap out with a screwdriver.
Figure 6