APsystems ECU-C - 6.Local Network Interface

ECU-C Installation/User Manual
32
7.Remote ECU-C Management (EMA)
The ECU-C has been designed with remote connect functionality. You can access
this remote functionality through the APsystems Energy Monitoring & Analysis
(EMA) website, using your installer login credentials. Changes made remotely
through the EMA do not take effect until the ECU-C’s next reporting cycle.
The ECU-C must first be installed with Internet connectivity.
The ECU-C remote functionality allows you to do the following:
 Set Time Zones

Manage Inverter IDs
There are additional ECU-C functions available but the instructions are not
outlined in this document. If you need to access one of the following features,
please contact APsystems Technical Support:

Change system parameters
 Turn the inverters ON and OFF
 Reset GFDI
 Reset Power Settings
This section of the documentation assumes you have a working
knowledge of the APsystems EMA.
1) Log onto your APsystems EMA account.
Your Customer List within the Installer Portal is displayed.
2) Select the customer’s ECU-C you want to manage and click on the username
in the "Customer Account" column.
Figure 21