APT (Tianjin) Development Co., Ltd.
5 / 17
7.1 Power On/Off
Press POWER button for 2 seconds, you can turn on/off the display. The Display
can automatically turn off when there is no operating and riding for 5 minutes. (The
time can be set，refer to 8.1.4 ‘Auto off’)
*Input pattern in first if pattern unlock was activated.
*Display will be locked for 30 seconds after 3 times failed attempt.
7.2 Assist levels
Press UP/DOWN button to change assist level. If the default setting is 9-gear: Top
assist level is 9, 0 for neutral. Level quantities can be adjusted according to the
customer requirements.
7.3 Screen Switching
Press POWER button to switch the screen, including Main Page, Basic information
Page and Information Page(The Main Page can be set，refer to 8.1.5 ‘Scenes’).
Main Page –Digital mode Main Page –Analog mode
To Next Page
Loading...
