APT TFT 750C User Manual

Tianjin APT Science and Technology Co., Ltd.
1001, Building 5 HuaDing, No.1 HuaKe 3 Road,
Binhai hi-tech Industrial Development Zone, Tianjin, China
1 TEL: 86 22 26345859
FAX: 86 22 8371 9955
Email: apt@aptdevelop.com
Product Specification
02/2017
Product
TFT LCD Display
Mode
APT TFT750C
Abbreviation
750C
Client
Customer
audit
Supplier
Tianjin APT Science and Technology Co., Ltd.
1001, Building 5 HuaDing, No.1 HuaKe 3
Road, Binhai hi-tech Industrial Development
Zone, Tianjin, China
Tel
TEL:+86 22 83715556
FAX:+86 22 83719955
Email
yzhao@aptdevelop.com

APT TFT 750C Specifications

General

Brand	APT
Model	TFT 750C
Category	Monitor
Language	English

Summary

Product Specification Overview

1. Product Identification

Product Type

Specifies the display technology used for the product.

Product Model Number

Identifies the specific model number of the product.

3. Electrical Specifications

Display Screen Details

Describes the screen type, size, and resolution for display.

Battery Voltage Requirements

Specifies the voltage requirements for the battery.

Current and Leakage Ratings

Details the rated operating and leakage current specifications.

Temperature Operating Ranges

Defines the temperature ranges for operation and storage.

6. TFT Screen Operation Guide

7. Functional Operation Guide

Power On/Off and Auto-Shutdown

Explains how to turn the display on and off and its auto-shutdown feature.

Assist Level Adjustment

Details how to adjust the assist levels and their ranges.

8. System Parameter Configuration

Unit System Settings

How to switch between metric and imperial units for display.

Display Brightness Control

Adjusts the screen backlight intensity for visibility.

Auto Power Off Timer

Sets the time delay before the display automatically turns off.

Battery Indicator Configuration

Configures how the battery level is displayed (Voltage, Percentage, Off).

Wheel Size Input

Battery Voltage Setup

Start Password Protection

Speed Limit Adjustment

Sets the maximum allowed speed for the e-bike.

Current Limit Setting

Controls the maximum current drawn by the motor.

Motor Pole Number

E-bike Start Mode

Assist Level Options

Restore Factory Defaults

Resets all parameters to their default factory values.

9. Error Code Definitions and Handling

Communication Error (01)

Controller Protection Error (02)

Three-phase Power Error (03)

Low Battery Warning (04)

Brake System Fault (05)

Throttle System Fault (06)

Hall Sensor Fault (07)

10. Assembly and Installation Guide

12. Assist Level Adjustment Guide

Assist Level Settings Table