Tianjin APT Science and Technology Co., Ltd.
1001, Building 5 HuaDing, No.1 HuaKe 3 Road,
Binhai hi-tech Industrial Development Zone, Tianjin, China
9 TEL: 86 22 26345859
FAX: 86 22 8371 9955
Email: apt@aptdevelop.com
default password is ‘1919’.
8.11 Speed limit : Press UP/DOWN will change speed limit, range 10km/h~45km/h.
Default value is 25km/h.
8.12 Current limit : Press UP/DOWN will change current limit, range 6A~50A. Default
value is 15A.
*Speed limit and current limit are restricted by controller and motor.
8.13 Poles in motor : Magnetic poles inside the motor, press UP/DOWN will change
pole number, range 1~6. Default value is 1.
Speed limit
Current limit Poles in motor
Start after poles Clockwise Start
Assist levels
Throttle 6km Start mode Throttle Level
Key antijam