Aqua TECHNOPOOL TT - Page 19

28/06/2013 ADSP7000596 TECHNOPOOL TT FRA-ING-ITA-SPA-POR Rev1.2
19
4.0 Injection volume
Technopool TT is designed for timed dosing hydrogen or chlorine injection.
Technopool TT 1.4 l/h inject 23,4 ml by minutes
(ex: if you may dose 233 ml, set the units at 10 minutes the dose time)
Technopool TT 3 l/h inject 46,7 ml by minutes
(ex: if you may dose 233 ml, set the units at 5 minutes the dose time)
Temps
ml INJECTION
(Avec Pompe par 1,4
L/h)
ml INJECTION
(Avec Pompe par 3
L/h)
d’injection
(min)
1 23 50
5 117 250
10 233 500
15 350 750
20 467 1000
25 583 1250
30 700 1500
35 817 1750
40 933 2000
50 1167 2500
60 1400 3000
Contact your chemical product supplier to have daily dose
preconisation in function of your pool size.
Injection time according to the temperature:
When water temperature grow up, chemical dose require in the pool increase also.
Technopool TT from 22 to 28°C increase the initial dose volume proportionally at
temperature elevation.
The dose will be adjusted automatically.
(Ex : if you set initial dose at 10 minutes up to 22°C you will dose 10 minutes at 28°C
you will dose 20 minutes)
Water
temperature
Injection time
Less than
22°C
Injection time x1
22 to 28°C
Injection time proportional to the temperature
(E.g.: at 25°C, injection time x1.5)
More than
28°C
Injection time x2
If temperature probe is not connected,
Technopool TT will always dose the same volume
as initial time.