Shower head systems installation instructions Page 6
Slide the rail assembly up through the top rail end body.
15
Align the small hole in the rail with the bottom rail end fixing point. Secure the rail assembly to the
wall, using the fixings provided, if suitable, taking care to not over tighten.
16
Place the rail end caps into the rail ends and push firmly into
position.
17
Pass the hose through the gel hanger.
18
Ensuring the hose washer is in the correct position, secure the
handset to the hose then place the handset into the handset holder.
N.B. If fitting the Quartz handset, depress the anti-swivel locking
button on the handset whilst securing the handset to the hose.
19
To Next Page
Loading...
