1. To select the preferred height for the shower head,
press the side levers to allow the handset holder to
move up or down the rail.
2. Angular adjustment is made by carefully but firmly
pulling forwards or pushing back the shower head
against the ratchet in the holder.
The angle of the fixed shower head can be
adjusted. The shower head is mounted on a
multi directional ball joint to allow for minor
angular adjustment in any direction by carefully
holding the shower head and moving the head
to the desired angle.
N.B. Do not force the angle of the head
beyond its natural stopping point.
Fixed Head
7
To Next Page
Loading...
