EasyManua.ls Logo

Aqualisa Midas 200 User Manual

Aqualisa Midas 200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Midas
Thermostatic exposed shower valve
and bath/shower mixer systems
Installation guide
Midas guide Sep 12 copy:Dolphin install Guide 05/09/2012 15:40 Page 1
Question and Answer IconNeed help?

Do you have a question about the Aqualisa Midas 200 and is the answer not in the manual?

Aqualisa Midas 200 Specifications

General IconGeneral
TypeExposed
Temperature ControlThermostatic
Installation TypeWall Mounted
FinishChrome
MountingWall
Inlet Type15mm Compression
Minimum Operating Pressure0.1 bar
Maximum Operating Pressure5.0 bar
Guarantee5 Year

Summary

Important Information

Safety Information

Installation by competent person, domestic use only, and adherence to Water Supply Regulations.

Product Specification

Details pressure ranges and system compatibility for Midas 100 and 200/300 models.

Gravity fed hot and cold supplies

Supply requirements for gravity systems

Details supply requirements for gravity systems, including pipe sizing and cylinder temperature.

Pump Installation

Balanced High-Pressure System

Combination Boiler/Multipoint System

Typical system diagrams

Gravity system installation diagram

Diagram illustrating gravity fed system setup with Midas 100/200/300 low pressure valves.

Pumped system installation diagram

Diagram illustrating pumped system setup with Midas 100/200/300 low pressure valves.

Midas Exposed Valves

System Flushing and Pressure Testing

Steps for flushing the system and pressure testing according to regulations.

User Guide

Midas 100 Controls and Operation

How to use temperature and flow controls on Midas 100 shower valve and mixer.

Midas 200/300 Controls and Operation

Operating Midas 200/300 shower valve and mixer, including temperature and flow.

User Guide - Shower Head

Cleaning and Maintenance

Guidance on cleaning Midas shower systems and descaling the shower head.

Midas Range Commissioning

Pre-set Temperature and Adjustment Procedure

Procedure to reset maximum temperature position, recommended at 46°C.

Steps for Temperature Adjustment

Detailed steps for adjusting temperature control knob using a thermometer.

Trouble Shooting Guide

Water Output Issues

Diagnosing and fixing problems with water output temperature and flow.

Flow Rate and Temperature Problems

Addressing poor flow rate, low temperature, and temperature swings.

Poor Flow Rate Causes

Identifying causes like twisted hose, debris in head or filters, and recommended actions.

Related product manuals