Need help?Do you have a question about the Aqualisa MIDAS 110 and is the answer not in the manual?
General| Finish | Chrome |
|---|---|
| Control Type | Thermostatic |
| Flow Rate | 12 l/min |
| Mounting | Wall Mounted |
| Inlet Centres | 150mm |
| Minimum Pressure | 0.1 bar |
| Guarantee | 5 Years |
| Inlet Connections | 15mm compression |
| Material | Brass |
| Approvals | WRAS Approved |
| Maximum Pressure | 5 bar |
| Outlet Connections | 1/2 inch BSP |
| Maximum Inlet Pressure | 10 bar |
Product must be installed by a competent person following regulations.
Optimal distance between cistern and shower head for gravity systems.
Guidelines for fitting booster pumps to gravity-fed supplies.
Details on fixing kits, brackets, and eccentric elbows.
Steps for adjusting inlet pipework using eccentric elbows.
Recommended thread depths and connecting eccentric elbows.
Procedure for flushing the system and pressure testing.
Fitting cover plates and ensuring inlet washers are in place.
Attaching the hose and performing a final system flush.
Drilling points and assembling the handset holder and rail.
Measurements and considerations before fitting the shower column.
Guidelines for wall mount installation of bath shower mixers.
How to adjust and set the desired shower temperature.
Operating the shower On/Off and adjusting water flow.
Adjusting shower head height and angular position.
To Next Page
