18
UK
Align the small hole in the rail with the bottom rail end fixing point. Secure the rail assembly to the
wall, using the fixings provided, if suitable, taking care to not over tighten.
Place the rail end caps into the rail ends and push firmly into
position.
Pass the hose through the gel hanger. Connect the longer conical
connection to the shower head and connect the shorter conical
connection to the valve.
Ensuring the hose washers are in the correct position, depress the
anti-swivel locking button on the handset and secure the handset
to the hose. Place the handset into the handset holder.
Shower head attachment
9
8
7
6
To Next Page
Loading...
